45
ALIGNMENT
- LINE DIST. EDGE -
H
V
0%
0%
When selecting “BIQUAD”:
• Pressing the CURSOR
or
increases the level.
• Pressing the CURSOR
or
decreases the level.
To switch to the adjustment position, press and hold CTL and
then press CURSOR
or
button.
A L I G N M E N T
- L I N E D I S T . B I Q U A D -
0 %
S C R E E N - T O P -
NOTE:
• The R,G,B POINT adjustments should only be done if neces-
sary. Over adjusting them may cause the picture distortion.
• The alignment adjustment affects three CRTs at the same time
while the convergence adjustment needs to be performed for
each CRT (R and B) separately.
1) Select "11/R,G,B POINT" from the "ALIGNMENT"menu and
press ENTER to display the "R,G,B POINT" menu. For
dynamic convergence, select "9/POINT" from the "CONVER-
GENCE" menu and press ENTER to display the "POINT"
menu.
m
Adjusting R,G,B POINT
3) Use the CURSOR buttons to align the pattern.
When selecting "CENTER":
• Pressing the CURSOR
or
button increases the level.
Pressing the CURSOR
or
button decreases the level.
When selecting "EDGE":
• Pressing the CURSOR
or
button corrects the vertical
lines.
Pressing the CURSOR
or
button corrects the horizontal
lines.