background image

 

 

1

Table of Contents 

Preface ...............................................................................................................................1

 

Chapter 1 Installation........................................................................................................2

 

1.1 Unpacking ....................................................................................................................................... 2

 

1.2 Pull down the base........................................................................................................................... 2

 

1.3 Viewing Angle Adjustment ............................................................................................................. 2

 

1.4 Detaching LCD Monitor from Its Stand .......................................................................................... 3

 

1.5 Interface for Arm Applications ....................................................................................................... 3

 

1.6 System Installation .......................................................................................................................... 3

 

1.7 Power Management System ............................................................................................................ 3

 

Chapter 2 Display Controls ...............................................................................................4

 

2.1 User Controls .................................................................................................................................. 4

 

2.2 Adjusting the Monitor's Display...................................................................................................... 4

 

Chapter 3 Technical Information .....................................................................................6

 

3.1 Specifications .................................................................................................................................. 6

 

3.2 Standard Timing Table.................................................................................................................... 7

 

3.3 Troubleshooting .............................................................................................................................. 8

 

 

Preface 

This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has 
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The 
information in this document is subject to change without notice. This document contains proprietary information 
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, 
electronic or other means, in any form, without prior written permission of the manufacturer. 

FCC Statement Warning 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed 
and used in accordance with the instruction, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following measures:   

• 

Reorient or relocate the receiving antenna.   

• 

Increase the separation between the equipment and the receiver.   

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   

• 

Consult the dealer or an experienced radio/TV technician for help. 

Warning 

Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or 
modifications not expressly approved by the party responsible for comliance could viold your authority to 
operate the equipment. 

Canadian DOC Notice 

 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulations.   
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel 
brouilleur du Canada.

 

 

Summary of Contents for AL1751









Reviews: