manualshive.com logo in svg

NEC Versa L320, User Manual

The NEC Versa L320 User Manual is a comprehensive guide designed to assist you in maximizing the full potential of your device. This easily accessible manual is available for download free of charge from our website, ensuring that you have all the necessary information at your fingertips.

Share
Download
background image

C-6   Frequently Asked Questions

Resuming from STF mode requires less time than performing a cold boot.

Your system must be configured for STF/Hibernation. In Windows Power
Management Properties, check the box labeled “enable hibernate support,”
under the Hibernate tab. In the BIOS Power Management Setup, enable the
“Auto save-to-file” parameter and set the “Suspend Option” to STF.

How do I bring my system out of Standby mode?

Pressing the Power button brings the system out of Standby mode.

What is a timeout?

A timeout is the amount of time your system or a particular component is
inactive.

What can I do to conserve battery power?

There are several ways to conserve battery power, and this is an important
activity, particularly if you frequently use your system in situations when you
can’t operate your system on AC power.

Try using your system with a lower screen illumination to conserve battery.

Run your system on battery power with Intel SpeedStep2 technology enabled.
This allows the processor to run at a lower speed during non-intensive
processor operations, and consequently conserves your battery.

There are also activities that draw larger amounts of battery power. If
possible, operate your system on AC power in these circumstances to
conserve your battery. For example, NEC Computers recommends running
the system on AC power while using external devices such as a printer or a
USB drive, when connected to a network, or while playing DVD movies.

Summary of Contents for Versa L320







































































































































































































Reviews:

No comments

Related manuals for Versa L320

IBM ThinkPad 380Z Hardware Maintenance Manual preview
ThinkPad 380Z
Brand: IBM Pages: 104
IBM ThinkPad 240 Compatibility Manual preview
ThinkPad 240
Brand: IBM Pages: 4
IBM 600E - ThinkPad 2645 - PII 400 MHz Quick Reference preview
600E - ThinkPad 2645 - PII 400 MHz
Brand: IBM Pages: 2
Tandy 1400LT Service Manual preview
1400LT
Brand: Tandy Pages: 301
Packard Bell TE69HW User Manual preview
TE69HW
Brand: Packard Bell Pages: 83
Dell Latitude C840 System Information Manual preview
Latitude C840
Brand: Dell Pages: 322
HP 6535b - Compaq Business Notebook Quickspecs preview
6535b - Compaq Business Notebook
Brand: HP Pages: 38
Lenovo 14ISK User Manual preview
14ISK
Brand: Lenovo Pages: 38
Lenovo 20934FU User Manual preview
20934FU
Brand: Lenovo Pages: 48
Lenovo 1706B8U Specifications preview
1706B8U
Brand: Lenovo Pages: 4
Lenovo 15ITL05 User Manual preview
15ITL05
Brand: Lenovo Pages: 66
Lenovo 1484805 User Manual preview
1484805
Brand: Lenovo Pages: 40
Lenovo 14APO6 User Manual preview
14APO6
Brand: Lenovo Pages: 40
Lenovo 14ITL6 User Manual preview
14ITL6
Brand: Lenovo Pages: 52
Lenovo 12992KU Specifications preview
12992KU
Brand: Lenovo Pages: 2
Lenovo 20126 Limited Warranty preview
20126
Brand: Lenovo Pages: 16
Lenovo 14ACN6 User Manual preview
14ACN6
Brand: Lenovo Pages: 38
Lenovo 1953D9U Brochure preview
1953D9U
Brand: Lenovo Pages: 4

Brands by name

Popular brands

Load more brands