NEC VERSA 2400 - SERVICE User Manual Download

Page: 97 / 166

Using Your NEC Versa 4-33

NOTE

When you connect a printer, be sure to install

the appropriate printer driver through the Windows
Control Panel.

Follow these steps to connect a serial device to your NEC
Versa.

Check that both the NEC Versa and the device power
are off.

Open the port cover on the back of the system and locate
the serial port.

Align and connect the 9-pin connector with the serial
port on the system. Secure the connection with the
screws provided.

Align and connect the other end of the cable to the ap-
propriate port on the device. Secure the connections with
the screws provided.

Connecting a serial device

Connect the power cable to the device and a properly
grounded wall outlet.

Summary of Contents for VERSA 2400 - SERVICE







































































































































































Search results

Summary of Contents for VERSA 2400 - SERVICE

Reviews:

Related manuals for VERSA 2400 - SERVICE

Brands by name

Popular brands

NEC VERSA 2400 - SERVICE, User Manual

Search results

Summary of Contents for VERSA 2400 - SERVICE

Reviews:

Related manuals for VERSA 2400 - SERVICE

Brands by name

Popular brands