Solving Problems 7-3
START-UP PROBLEMS
The system displays an invalid configuration error message
at power on when there are the following conditions:
the current configuration information doesn't match
configuration information stored in Setup, such as when
an internal option is added.
the system loses configuration information.
If either condition is true, the system displays an “invalid
configuration information” message.
To continue start-up procedures, press
F2
and run the Setup
utility to set current system parameters.
If an error message appears before the operating system
starts, look up the error message in the following table.
Follow the instructions. If you see other error messages, the
hardware might need repair.
NOTE
When the NEC Versa detects an error related
to display devices, it cannot display on either the
LCD or a CRT. The system warns you by beeping.
POST Error Messages
The NEC Versa 2400 has a built-in checking program that
automatically tests its components when you turn the sys-
tem power on. This diagnostic test is called the Power-On
Self-Test (POST). If the system finds a problem during the
POST, the system displays an error message. If this hap-
pens, follow the instructions in the POST error message
table.
