V850ES/Jx3H – Plug it!
In the next step the Emulator has to be configured before downloading a new application. Press the OK
button to enter the emulator hardware setup. Set the configuration as show in the figure below and start the
download by pressing the OK button.
Set the main oscillator
frequency to 6MHz
with multiply rate 8 and
sub-oscillator freq. to
32.768kHz
Figure 29: MINICUBE Hardware Setup Dialogue
Now the debugger is started and the demo project is downloaded to the
V850ES/Jx3-H - Plug it!
board. The
progress of downloading is indicated by blue dots in the MINICUBE Emulator window. Please note that
downloading of larger executables may take some time.
After the download was completed all debug features of IAR C-SPY debugger are available, i.e. Single
Stepping, Step Over/-In/-Out, Go-Execution, Breakpoints, Register / Memory view etc.
To run the sample application select the option “Go” from the “Debug” menu or press the ( ) “Go” button.
To get more details on the debugger configuration and capabilities please refer to the “IAR Embedded
Workbench IDE User Guide” of the IAR installation.
User’s Manual U19647EE2V0UM00
38
