V850ES/Jx3H – Plug it!
It is necessary to tell the compiler where the additional Header files of the demonstration samples are
located. Select the category “C/C++ compiler” and then the tab “Preprocessor”. Now the additional Include
path can be added to the field “Additional include directories”.
Add additional
Include path here.
Figure 26: Include directory
As next step select the category “Debugger”. Make sure that the driver is set to “MINICUBE”. After this select
the category “MINICUBE” down below and tick the box “Use MINICUBE2 (MINI2)” in order to use the On-
Board debug function of the
V850ES/Jx3-H - Plug it!
board.
The corresponding COM port where the
V850ES/Jx3-H - Plug it!
board is connected to the host PC will be
detected automatically by the IAR C-SPY debugger.
Select “Use MINICUBE2” to
use On-Board debugging.
Figure 27: IAR debugger options
User’s Manual U19647EE2V0UM00
36
