Administrator Features 133
Using Internet Explorer and Windows Media Player with User Account
The standard feature of US40a defines that Internet Explorer and Windows Media Player are
unavailable with the User account. To use Internet Explorer and Windows Media Player with the
User account, take the following changes. These procedures must be done with the Administrator
account.
Internet Explorer
1.
Log on to US40a as Administrator.
2.
Start the command prompt.
Select [Start]
→
[Run] and run "CMD.EXE".
3.
Mover to "C: \US40a\Tools".
4.
Run "IE_Enable.bat".
5.
At end of the setting change, "Done." appears. Log on to US40a with the User account.
6.
Make sure that the icon of Internet Explorer is added and available in [All Programs] in
the [Start] menu.
Windows Media Player
1.
Log on to US40a as Administrator.
2.
Start the command prompt.
Select [Start]
→
[Run] and run "CMD.EXE".
3.
Move to "C: \US40a\Tools".
4.
Run "WMP_Enable.bat".
5.
At end of the setting change, "Done." appears. Log on to US40a with the User account.
6.
Make sure that the icon of Windows Media Player is added and available in [All
Programs] in the [Start] menu.
To make Internet Explorer and Windows Media Player unavailable with the User account again, run
IE_Disable.bat and WMP_Disable.bat out of "C: \US40a\Tools", respectively.
US40a will be rebooted twice automatically to disable Internet Explorer and Windows Media Player
with the User account.
Summary of Contents for US40a
