NEC US40a, User Manual

Page: 152 / 166

132 Administrator Features
Updating Software by Using Application Installer
US40a also provides a procedure of updating software by using USB storage device. Only
administrators can update software from USB storage device.
To use USB storage device, create a folder named US40a in the USB storage device and save files
to be installed and their list (list.txt) to be needed to be updated in the folder.
To update software from USB storage device, select [Application Installer] in the [Control Panel].
Updating Software from USB Storage
Update software from USB storage device in the following steps:
1.
Create a folder named US40a in USB memory formatted in FAT.
2.
Save files to be updated in US40a folder.
3.
Create the list.txt file in US40a folder.
list.txt contains the names of files to be updated. Save the files in the Unicode format.
4.
Log on to US40a with the Administrator account and connect USB memory to US40a.
5.
Run [Application Installer] in the [Control Panel].
6.
Press the [Start Installation] button.
The update processing is initiated.
7.
During the update, the dialog prompting you to reboot US40a may appear. If this occurs,
reboot US40a according to the dialog.
Setting Initialization
To return the settings of US40a to the factory default, provide re-setup according to "Appendix D.
Re-installing CD".
IMPORTANT:
The setting initialization deletes all modifications
done from the Administrator account, additional programs installed and
additional devices and returns all settings to the factory default.