manualshive.com logo in svg

NEC UNIVERGE NEAX 2000 IPS, System Manual

Share
Download
NEC UNIVERGE NEAX 2000 IPS System Manual Download Page 106

CHAPTER 3 SYSTEM DATA PROGRAMMING

– 92 –

NWA-008853-001 Rev.3.0

97ch3001.fm

Office Data Conversion

When upgrading the software of the system from Series 3300 or before to Series 3400 or later, the office
data conversion by CM00>90 is required. The office data that has been converted and the office data in
Series 3400 software or later are incompatible with the software of Series 3300 or before. We recommend
to execute the system data backup before the office data conversion.

NOTE:

When upgrading the software in Retrofit system to Series 3400 or later, convert the office data 
using “Office Data Converter” in the MATWorX CD-ROM and then execute the office data 
conversion by CM00>90.

DESCRIPTION

DATA

Execute the office data conversion.

[Series 3200 R6.2 software required]

(1)
(2)

90
0: Start conversion
1: Always displayed after first data “90” is 

typed

NOTE 1

NOTE 1:

When first data “90” is typed, second data “1” is displayed. Also while converting the 
office data, “1” is displayed.

NOTE 2:

There is no problem even if the office data conversion is executed repeatedly.

START

CM00

OFF LINE

END

JANUARY/31/2006

PRECAUTIONS

Summary of Contents for UNIVERGE NEAX 2000 IPS

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands