NEC UNIVERGE Aspire UX Basic Operation Manual Download Page 9

Page: 9 / 44

Controlling the Volume and Display Contrast

Controlling the volume

Loud

Soft

Volume keys

Redial

If the person you are talking with is either too

loud or hard to hear, you can control the

volume.

When the call is disconnected, the volume is

returned to the level as it was.

Press the volume keys as needed while

you are talking over the telephone.

Controlling the handset volume

You can control the speaker volume.

The volume can be adjusted to one of 14

levels.

Press the volume keys as needed while

using the telephone for making a hands-

free call.

Controlling the speaker volume

You can control the volume of the ringing

tone.

The volume can be adjusted to one of 13

levels.

Press the volume keys as needed while

the telephone is ringing.

Controlling the ringing volume

You can control the volume of the off-hook

signaling that you will hear if the called party

is busy.

Press the volume keys as needed while

you hear the off-hook signaling.

Controlling the off-hook signaling volume

Controlling the ringing volume

changes as well as controlling the

off-hook signaling volume.

Controlling the contrast

Dark

Light

Volume keys

Redial

You can control the display contrast while the

telephone is idle.

Press the volume keys as needed while

checking to see how the display changes.

Controlling the display contrast

Control the display contrast while

the telephone is idle.

If you try to adjust the display

contrast while the telephone is off-

hook or ringing, you will actually

adjust the handset or ringing volume.

Adjusting the angle of the telephone

You can adjust the telephone to an easy-to-use angle. To
do so, adjust the tilt leg on the bottom of the telephone.

Pulling the tilt leg up

Tilt leg

Pushing the tilt leg down

Summary of Contents for UNIVERGE Aspire UX













































Search results

Summary of Contents for UNIVERGE Aspire UX

Reviews:

Brands by name

Popular brands

NEC UNIVERGE Aspire UX, Basic Operation Manual

Search results

Summary of Contents for UNIVERGE Aspire UX

Reviews:

Brands by name

Popular brands