manualshive.com logo in svg

NEC UNIVERGE Aspire UX, Basic Operation Manual

Share
Download
NEC UNIVERGE Aspire UX Basic Operation Manual Download Page 27

25

Usage of the service

1 

Make a call to access the service.

2 

Dial the number you want to send.

3 

Replace the handset.

When the call is disconnected, the DTMF tone 

send function is canceled.

If you cannot send DTMF tones

Depending on the type of the telephone line that 

you are using, the above operation may fail to send 

DTMF tones. In this case, press #, and then dial the 

number that you want to send.

What this function does

If you use a dial pulse-type line (DP) but want to use a 

touch-tone telephone service, you can use your telephone 

to send DTMF tones.

What you can do with this function

Use this function to allow you to access a touch-tone 

telephone service like those listed below:

•  Telephone banking service

•  Ticket reservation service

Using Touch-Tone Telephone Services

Pulse to Tone Conversion

(   )

1

2

3

4

5

6

7

8

9

0

Summary of Contents for UNIVERGE Aspire UX













































Reviews:

No comments

Brands by name

Popular brands

Load more brands