E – 43
External Control
RS232C
(1) D-sub 9 pin
Contact Closure
Switcher
(2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
Power Requirement
200-240 VAC, 50/60Hz
Input Current
14 A
Power Consumption
2.8 kW
Mechanical
Installation
Orientation:
Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Stacking:
Up to 2 projectors can be gravity stacked
Dimensions
26.8"(W)
⳯
40.0"(D)
⳯
16.5"(H) with lens hood and feet (not including stacking pads and handle)
680 mm(W)
⳯
1016 mm(D)
⳯
420 mm(H) with lens hood and feet (not including stacking pads and handle)
Net Weight
185.3 lb (84Kg) (without lens)
Environment
Operational Temperature:
40˚ to 95˚F / 5˚ to 35˚C,
Humidity: 20-80% non-condensing
Storage Temperature: 14˚ to 122˚F / -10˚ to 50˚C
Humidity: 20-80% non-condensing
Regulations
USA
UL 1950
FCC Class A
Canada
CSA950 ( C-UL )
Europe
EN60950
EN55022 Class A
EN55024
EN61000-3-2
EN61000-3-3
Japan
J60950
VCCI
Oceania
EN60950
AS/NZS3548
Class A
Asia
EN60950
CISPR22
Class A
*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 3/4 pixel or less around the perimeter (when projection
upward angle is 0˚).
*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.
Specifications are subject to change without notice.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
