manualshive.com logo in svg

NEC SuperScript 4200N, Online User'S Manual

Share
Download
NEC SuperScript 4200N Online User'S Manual Download Page 58

50

SuperScript 4200N — User’s Guide

2.

Press the Menu  button to enter menu mode. 

CONTROL 

appears on the display.

3.

Press the Next  button until 

COMMUNICATIONS 

appears 

on the display, and press the Select  button.

4.

Press the Next  button until 

NETWORK 

appears on the 

display, and press the Select  button.

5.

Press the Next  button until 

TCP/IP 

appears on the display, 

and press the Select  button.

6.

Press the Next  button until 

NET ADDRESS

 

appears on the 

display, and press the Select  button.

7.

Use the Operator Panel buttons to set values for each of 
the 12 digits in this manner.
First press Next  to set the cursor to the first digit.
For the first digit, press Select  to increment to the correct 
value. Then press Next  to move to the next digit and 
press Select  to increment to its correct value. Continue 
until all twelve digits are set. When the final digit is set, 
press Next  to confirm the Net Address you set and then 
press Select .

8.

Press Menu  to exit menu mode and press Online  to 
bring the printer online.

SUBNET MASK

, and 

GATEWAY 

are set in the same way. If you 

select 

ENABLE

, the TCP/IP protocol is enabled.

To validate any changes to network settings, turn off the 
printer, wait 10 seconds, then turn on.

Summary of Contents for SuperScript 4200N

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands