Operator Panel Tasks
49
THE OPERATOR PANEL
Setting Media Type
When you load a new paper type into the tray, you should set
the Media type. If you do not specify the correct media type,
print quality may be poor, because the printer will move the
paper at the wrong speed. To change the Media type, press
the Media button to display
PAPER
or
THICK STOCK
.
Stopping a Job
If you wish to stop a print job before it is complete
1.
Press the Online button to take the printer offline.
2.
PRESS SELECT TO CANCEL JOB
appears on the message
display.
3.
Press the Select button to cancel the job.
4.
Press Online to resume printing.
Resetting the Printer
You can reset the printer to its previous settings. Follow these
steps.
1.
Press Online .
OFFLINE
appears on the display.
2.
Press Menu .
MENU - CONTROL
appears on the display.
3.
Press Next until
RESET PRINTER
appears on the display.
4.
Press Select, and when the panel displays
CONFIRM
,
press Select again.
Resetting the NIC
You can reset the NIC to its factory default settings. Follow
these steps.
1.
Press Online .
OFFLINE
appears on the display.
2.
Press Menu .
MENU - CONTROL
appears on the display.
3.
Press Next until
RESET NIC
appears on the display.
4.
Press Select, and when the panel displays
PARAMETERS
,
press Select again.
Restoring Factory Defaults
To restore factory default settings to the printer
1.
Turn off the printer.
2.
While pressing the Online and Media buttons, turn on
the printer. When the display changes to
INITIALIZE
NVRAM
, release the buttons.
Or follow these steps.
1.
Press Online .
OFFLINE
appears on the display.
2.
Press Menu .
MENU - CONTROL
appears on the display.
3.
Press Next until
SETUP
appears on the display, and press
the Select button.
4.
Press Next until
RESTORE DEFAULTS
appears on the
display, and press the Select button.
5.
When the panel displays
CONFIRM
, press Select again.
Except those under Communications Menu will be
restored to their default.
Printing 4200N Information Pages
You can print a number of different pages formatted with
useful information about your printer. Follow these steps.
1.
Press Online .
OFFLINE
appears on the display.
2.
Press Menu .
MENU - CONTROL
appears on the display.
3.
Press Next until
PRINT FORM
appears on the display.
4.
Press Select
.
5.
Press Next until you see the page you want to print. Your
choices are,
DEMO PAGE, PS START PAGE, PS FONT PAGE,
and
MENU TREE PAGE.
Resetting Usage Reports
You should reset the Usage Status any time you replace the
Belt Cartridge, Fuser Cleaning Roller, or Fuser Unit. Follow
these steps. The example below shows how to reset the Usage
Report when you replace the Fuser Unit.
1.
Press Online .
OFFLINE
appears on the display.
2.
Press Menu .
MENU - CONTROL
appears on the display.
3.
Press Next until
USAGE STATUS
appears on the display.
4.
Press Select .
5.
Press Next until
REPLACE FUSER
appears on the display.
6.
Press Select, and when the panel displays
CONFIRM
,
press Select again.
TCP/IP Setup
You can use the operator panel to enable and set up the TCP/
IP networking parameters for the printer. This is particularly
useful for setting the network IP address so you can use it as
the printer’s URL in web-based printing. Follow these steps.
1.
Press the Online button of the Operator Panel.
OFFLINE
appears on the display.
Summary of Contents for SuperScript 4200N
