4.
Insert the CF card (with the new main system software loaded) to the CF slot on PZ-VM21
daughter board. (PZ-VM21 should be temporary installed if not already fitted.)
CPU card
CF Slot (CN2)
CF card
PZ-VM21 PCB
D3 (Red)
D1 (Blue)
D2 (Red)
D4 (Red)
D5 (Red)
Figure 4-17 Inserting the CF card
5.
Push in and hold the
LOAD
button (S1 on the CPU card).
Sub-Cover
Tab
< Front view >
S1
LOAD
CPU card
Tab
Figure 4-18 LOAD Button (S1) Location
6.
Turn the system power on.
7.
Continue holding the
LOAD
button (S1) for approximately 10 seconds or until Status LED (D5)
starts flashing red.
8.
Release the
LOAD
button (S1).
9.
Wait until the Status LEDs (D2 to D5) on the CPU card has the following indications
(approximately two minutes).
Table 4-1 Status LEDs
LED No.
Indication
Remarks
D2
Flashing Red
D3
Flashing Red
D4
Flashing Red
D5
Off
ISSUE 3.0
SL1000
Hardware Manual
4-11
Summary of Contents for SL1000
