NEC SIGMABLADE N8406-035, User Manual

Page: 18 / 62

NOTES ON SAFTY
4
Keep water or foreign matter away from the 10Gb Pass-Through
Card, SFP+ and SFP module.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper clips)
enter this product. Failure to follow this warning may cause an electric shock, a fire,
or a failure of this product. When such things accidentally enter this product,
immediately turn off the power and disconnect the power plug from the outlet. Do not
disassemble this product. Contact your service representative.
Make sure to complete device installation.
Always install the 10Gb Pass-Through Card, SFP+ and SFP module firmly. An
incompletely installed device may cause a contact failure, resulting in smoking or fire.
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and connector
before connecting a cable. Using an authorized cable or connecting a cable to an
improper destination may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.

Do not use any damaged cable connector.

Do not step on the cable.

Do not place any object on the cable.

Do not use the Blade Enclosure with loose cable connections.

Do not use any damaged cable.
Avoid installation in extreme temperature conditions.
Immediately after the 10Gb Pass-Through Card is powered off, its internal
components and components in Blade Enclosure are very hot. Leave them until their
internal components fully cool down before installing/removing any component.
Avoid contact with the 10Gb Pass-Through Card, SFP+ and SFP
module during thunderstorms.
Disconnect the power plug from the outlet when a thunderstorm is approaching. If it
starts thundering before you disconnect the power plug, do not touch any part of the
10Gb Pass-Through Card, SFP+ and SFP module including the cables. Failure to
follow this warning may cause a fire or an electric shock.
Keep animals away from the 10Gb Pass-Through Card, SFP+ and
SFP module.
Animal
’
s discharges or fur may enter the 10Gb Pass-Through Card, SFP+ and SFP
module and cause a fire or electric shock.
CAUTION