NEC SIGMABLADE N8406-035, User Manual

Page: 44 / 62

(English)
24
■
Common(N8406-035,-036)
6 Ejector
7 Stopper
Name Description
- Connected to the LAN ports on the Mezzanine card in the CPU Blade.
- Requires a SFP module (optional; See below) for each port. The number
besides every 4 SFP+ ports represents the number given to each CPU Blade
slot in the Blade Enclosure. See
LAN Cabling in Blade Enclosure (page.27)
- The connector cover (see below) is attached to all the ports at the time of
shipment.
1. SFP+ port
Supported SFP(+) Modules
-
N8406-024 1000Base-SX SFP module
- N8406-037 10GBase-SR SFP+ module
- N8406-039 1000Base-T SFP module
Connector Cover
2. ID LED
- Indicates the card being operated.
3. Status LED
- Indicates the card status.
- Contact your service representative if it does not turn green in a minute after you
power on.
- Indicates the link status and activity of each LAN port
Off Link not established
On (Green) Link established (10Gbps)
On (Amber) Link established (1Gbps)
4. Link/Act/Speed LED
Blinking
Data being transmitted or received
5. Reset Switch
- Press to restart the card.
- Pressing this button disconnects the link with the card and terminates
communication. The communication resumes in about 10 seconds.
6. Ejector
- Use this lever to install or remove a switch module from the Blade Enclosure.
7. Stopper
- Use this latch to fix an ejector of the Pass-through module.