NEC S2900, User Manual, Page: 108 / 168

91
7.
Strongly push the ejector (the part indicated by the arrow in the figure) until the new power
supply for the disk enclosure is seated properly, and secure the ejector with the screw.
When inserting the power supply for the disk enclosure into the disk enclosure, push it as
far as it will go and then secure it with the screws.
Incorrect insertion may cause a nother power supply failure.
8.
Insert the receptacle of the power cord shipped with the FC/SATA disk enclosure into the
power plug of the power supply for the disk enclosure. Extend the clamp section of the AC
cable clamp, fit it to the AC cord, and lock the clamp section lightly. Then, move the clamp
section toward the receptacle of the power cord to make a clamp at a point near the end of the
plug. Securely lock the clamp section to avoid disconnection.
Open
Fix
Clamp
Power cord