manualshive.com logo in svg

NEC POWERMATE PROFESSIONAL 9000 - SERVICE, Service Manual, Page: 119 / 296

Share
Download
NEC POWERMATE PROFESSIONAL 9000 - SERVICE Service Manual Download Page 119

Setup and Operation      2-37

NEC WEBTELLIGENT

NEC WebTelligent

 is a web-based desktop management system that works with Intel

®

LANDesk

®

 Client Manager (LDCM) version 3.1 or later, Desktop Management Interface

(DMI) version 2.0, and the World Wide Web to perform administrative tasks across
multiple platforms, either locally or remotely over a network.

Through NEC WebTelligent, the managed client desktop PC administrator can manage
from a desktop computer using the Netscape

®

 or Microsoft

®

 Internet Explorer Web

browser. The administrator can perform WebTelligent account and asset management,
monitor the “health” of networked systems, and receive alert notifications from managed
clients.

NEC WebTelligent is an easy-to-use web-based graphical user interface that runs on the
Netscape and Microsoft Internet Explorer browsers (see the following figure).

 

Figure 2-13  NEC WebTelligent

NEC WebTelligent Features

NEC WebTelligent provides the administrator with the following features and benefits.

„

WebTelligent Account Management

 

Create and delete user accounts

 

Change user passwords

 

Disable user accounts

 

Summary of Contents for POWERMATE PROFESSIONAL 9000 - SERVICE









































































































































































































































































































Reviews:

No comments