Technical Information 1-19
NOTE:
When ATA and ATAPI devices are
installed on the same channel, primary or
secondary, the ATA device must be configured
as the master.
SCSI Hard Disk
All SCSI configuration systems ship with one internal 3 1/2-inch hard disk (1-inch high,
thin-height) installed behind the front panel in the bottom slot in the drive cage. A three-
connector hard disk drive cable connects the SCSI hard disk to the Ultra Wide SCSI
adapter board. An optional second hard drive can be connected to the middle connector on
the hard disk drive cable. Before installing additional SCSI devices, review the basic SCSI
concepts provided in “SCSI Devices” in Section 3 of the PowerMate Pro2200/2180 Service
and Reference Manual.
EIGHT-SPEED CD-ROM
An eight-speed CD-ROM reader comes pre-installed as drive E. The reader can be used to
load programs from a CD or it can be used to play audio CDs. The reader operates at
different speeds depending on whether the CD contains music or data. The reader is fully
compatible with Kodak Multisession Photo CDs™ and standard CDs.
CD-ROM Reader Operation
Use the CD-ROM reader to load and start programs from a CD or to play audio CDs. The
CD-ROM reader has the following controls and indicators (see Figure 1-4):
jack for connecting headphones with a stereo mini-jack plug
volume control for adjusting the headphone volume
busy lamp that lights during read operations
open/close button for opening or closing the CD tray when the power is on
CD tray that opens and closes when the eject/retract button is pressed
emergency eject hole in the front panel for manually opening the CD tray if power
is lost. Insert a paper clip into the hole and press inward to open the tray.
Summary of Contents for POWERMATE PRO2180 - SERVICE 1997
Page 5: ...vi Contents ...
