3-38 Disassembly and Reassembly
Accessible Device Placement for a Desktop
A – 5 1/4-Inch Bays on Top
B – 3 1/2-Inch Bracket in Lowest Bay
8.
Remove the logo plate by unclipping its tabs from inside the front panel. Position the logo
plate so it is readable when the chassis is in the horizontal position. Press the tabs into the
front panel until they click in place.
9.
Replace the front panel (see “Replacing the Front Panel”).
10.
Replace the system cover (see “Replacing the Cover”).
Converting from Desktop to Minitower
If the system has been used as a desktop, you can convert it to a minitower system using the
following steps.
Before converting the system, turn off system power and unplug the
system power cable. Power is removed only when the power cable is unplugged.
1.
Turn off and unplug the system.
2.
Disconnect any external options (such as a keyboard and monitor) from the front or rear of
the system.
3.
Remove the system cover (see “Removing the Cover”).
4.
Remove the front panel (see “Removing the Front Panel”).
5.
Remove all devices, covers, and stored rails from the accessible device cage. See the
following sections for the procedures.
!
“Removing a Bay Cover”
!
“Storing and Retrieving Unused Rails”
!
“Removing a 5 1/4-Inch Accessible Device”
!
“Removing a 3 1/2-Inch Accessible Device”
Summary of Contents for PowerMate CT
Page 13: ...1 System Overview Configurations Features Components...
Page 118: ...6 Preventive Maintenance System Cleaning Keyboard Cleaning Mouse Cleaning...
Page 121: ...7 Troubleshooting Checklist Diagnostics...
Page 130: ...8 NECC Information Services Service Telephone Numbers Technical Support...