NEC PowerMate CT, Service And Reference Manual

Page: 64 / 167

3-6 Disassembly and Reassembly
Replacing the Front Panel
Replace the front panel as follows.
1.
Align the three tabs (
B
) on the inside edge of the front panel with their corresponding slots
(
A
) on the lower edge of the chassis (see the following figure).
2. Insert the tabs into their slots and press the front panel up against the chassis until the front
panel locks in place.
3. Replace the cover (see “Replacing the Cover” earlier in this section).
Replacing the Front Panel
A – Slots on Chassis (3) C – Front Panel
B – Tabs on Front Panel (3) D – Chassis Front
Expansion Boards
The following sections describe how to:
!
remove and replace the retainer bar, which secures expansion boards and slot covers
! remove and replace expansion boards
!
remove and replace slot covers.
The following figure shows the locations of the expansion slots on the chassis and the expansion
board connectors on the system board.