manualshive.com logo in svg

NEC POWERMATE 8100 RELEASE NOTES, Manual, Page: 65 / 277

Share
Download
NEC POWERMATE 8100 RELEASE NOTES Manual Download Page 65

3-22   Configuring the System

Boot Menu

The Boot Menu is a top-level menu in the BIOS Setup utility. Choose the
Boot Menu by selecting Boot in the legend bar.

Boot Menu options are available by selecting submenus. Use the arrow
keys to select a Boot Menu option. Press 

Enter

 to display the submenu.

Items with grayed-out text are not changeable from the submenu.
Explanations of each Boot Menu option and suboption appear in the
following table.

Boot Menu Items

Menu Item

Settings (default is bold) and description

Boot Time Diagnostic
Screen (Quiet Boot)

Disabled, Enabled

The Disabled setting causes the NEC splash screen
to display instead of the POST screen during the
boot.

Quick Boot Mode

Enabled, Disabled

The Enabled setting causes certain tests to be
skipped during the boot, to decrease the time it
takes to boot.

Virus Check Reminder

Disabled, Daily, Weekly, Monthly

When this field is set to Daily, Weekly, or Monthly,
the system displays a virus check reminder
message during boot up on a daily, weekly, or
monthly basis.

System Backup Reminder

Disabled, Daily, Weekly, Monthly

When this field is set to Daily, Weekly, or Monthly,
the system displays a system backup reminder
message during boot up on a daily, weekly, or
monthly basis.

Fixed Disk Boot Sector

Normal, Write Protect

When this field is set to Write Protect the fixed disk
boot sector is write-protected against viruses.

Summary of Contents for POWERMATE 8100 RELEASE NOTES






















































































































































































































































































Reviews:

No comments