manualshive.com logo in svg

NEC POWERMATE 8100 RELEASE NOTES, Manual, Page: 118 / 277

Share
Download
NEC POWERMATE 8100 RELEASE NOTES Manual Download Page 118

4-20   Managing System Resources

NEC Auto Backup Utility

The NEC Auto Backup utility works with LANDesk Client Manager and
Cheyenne Backup to detect predicted hard drive failures and to
automatically back up the data from the failing drive. The utility only
works with SMART hard drives and it requires both LANDesk Client
Manager and Cheyenne Backup to function.

The Auto Backup utility runs from the Startup group on the Windows
Start menu. The utility has some configuration options that are accessible
through the system tray icon. The NEC Tools group on the Start menu
includes a ReadMe file containing recent information about the utility as
well as access to a Help document.

Cheyenne Backup configuration determines the exact nature of the
backup that will be performed automatically. See the online Help for
Cheyenne Backup Configuration for information about available options.

Install the NEC Auto Backup utility from the NEC Select
Install CD. For installation information, see “Installing Applications” in
Chapter 3.

Summary of Contents for POWERMATE 8100 RELEASE NOTES






















































































































































































































































































Reviews:

No comments