![background image](http://html.mh-extra.com/html/nec/powermate-466m/powermate-466m_service-manual_248629146.webp)
6-10 Minitower Repair
SIMM Removal
Remove the SIMM sticks per Figure Section 6-9 and the following steps.
1.
Remove the top cover and any full size expansion boards as previously described.
2.
Spread apart the two clips at each end of the SIMM stick (the clips are part of the
system board's connectors). Tilt the SIMM stick forward, allowing the post to
slide out of the hole in the SIMM stick.
3.
Remove the SIMM stick from the system board. Repeat step 2 for each SIMM to
be removed.
NOTE:
If more detailed information is needed,
see the installation instructions in Section 3,
Options.
Figure Section 6-9 SIMM Socket
Clips
Hole
Post
Summary of Contents for PowerMate 466M
Page 10: ...Contents xiii ...
Page 176: ...Connector Pin Assignments A 15 ...