3-6 Options
Figure Section 3-10 Inside Expansion Slot Screw
3.
When removing an expansion slot cover from the inside of the ISA/VL-Bus back-
board, separate the inside expansion slot L-bracket from the expansion slot cover
by removing the screw shown in Figure Section 3-12.
Reattach the L-bracket to the expansion board being installed.
Figure Section 3-12 Removing the Inside Expansion Slot Bracket
4.
Install the expansion board into an expansion slot connector. When installing a
full-size expansion board, make sure that the expansion board slides into the guide
rail at the front of the system unit.
NOTE:
A full-size expansion board cannot be
installed into the backside expansion slots.
Slot Cover
Slot Cover Screw
(for top slot)
Screw
L-Bracket
Slot
Cover
Summary of Contents for PowerMate 466M
Page 10: ...Contents xiii ...
Page 176: ...Connector Pin Assignments A 15 ...