3
v
v
v
4-2. Adjustment of the DVD/HD screen position
Make correct adjustments of the display range with [MHPOS] and [MVPOS].
(1)
Enter an input of HDTV monoscopic signal in the DVD/HD input terminal. According to the “convenient
functional setting” in the [MENU] screen, press the cursor key [^] or [v] of the remote control to confirm
that [HD SELECT] has been set at [1035i].
(2)
Select the HD input by the use of the relevant key of the remote control or the CTL PWB.
(3)
Enter the factory shipment setting mode by using the factory shipment control command of the remote
control.
(4)
Press the [PROCEED] key to obtain the [POSITION] screen.
(5)
In case of any deviation from the display range of the PDP module, press the cursor key [ ] or [v] of the
remote control to select [MHPOS] or [MVPOS]. Press the cursor key [<] or [>] for adjustments.
(6)
Press the cursor key [ ] or [v] of the remote control to select [H POS].
(7)
Press the cursor key [<] or [>] for adjustments so that the right and left are balanced.
(8)
press the cursor key [ ] or [v] of the remote control to select [V POS].
(9)
Press the cursor key [<] or [>] for adjustments so that the upper and lower are balanced.
(10) Confirm that [H PHA] is maintained at 0.
(11) Confirm that [H CLK] is maintained at 0.
(12) Change the input video signal to the NTSC component signal and repeat the steps of 1-1 (3) to (11)
above.
(13) Change the input video signal to the DTV 1080i signal and repeat the steps of 1-1 (3) to (11) above.
(14) Change the input video signal to the DTV 1080i signal. Press the cursor key [<] or [>] of the remote
control to select [1080B] for [HDS] of the screen. Repeat the steps of 1-1 (3) to (11) above. Return [HDS]
to [1080i].
(15) Change the input video signal to the DTV 720P signal and repeat the steps of 1-1 (3) to (11) above.
(16) Change the input video signal to the DTV 480P signal and repeat the steps of 1-1 (3) to (11) above.
(17) Withdraw from the factory shipment setting mode.
Summary of Contents for PlasmaSync 50MP1
