Important Information
–
viii
–
Connecting the power cord to earth
This equipment is designed to be used in the condition of the power cord con-
nected to earth. If the power cord is not connected to the earth, it may cause
electric shock. Please make sure the power cord is earthed properly.
Do not use a 2-core plug converter adapter.
Handling the power cord
connector is fully and firmly inserted. Loose connection of the power cord could
lead to fire or electric shock.
Do not connect or disconnect the power cord with wet hands. Doing so could
result in electric shock.
When cleaning the projector, for safety purposes unplug the power cord from the
power outlet beforehand.
When moving the projector, first be sure to turn off the power, unplug the power
cord from the power outlet and check that all connection cables connecting the
projector to other devices have been disconnected.
When planning not to use the projector for long periods of time, always unplug
the power cord from the power outlet.
Do not use on networks subject to overvoltage.
Connect the projector
’
s Ethernet/HDBaseT port and LAN port to a network for
which there is no risk of overvoltage being applied.
Overvoltage applied to the Ethernet/HDBaseT or LAN port could result in electric
shock.
Lens shift, focus and zoom operations
When shifting the lens or adjusting the focus or zoom, do so from either behind or
to the side of the projector. If these operations are performed from the front, your
eyes could be exposed to strong light and get injured.
Keep your hands away from the lens area when performing the lens shift
operation. If not, your fingers could get caught in the gap between the cabinet and
the lens.
