Safety Locking Tab Operation
The NP30UCM comes equipped with a locking safety tab. When the collar assembly and the mounting plate of the NP30UCM are
engaged, the safety locking tab will prevent the collar from disengaging.
Step 1
. Unhook the cable safety clamp from
the
mounting
plate.
Step 2
. Lift the locking tab.
Step 3
. Rotate the collar assembly.
Step 4
. Separate the mounting plate
from the collar assembly.
Please remember to support the projector whenever separating the projector plate from the upper assembly.
Two people are required to perform this step.
Attaching the Mount
Only attach to the projector manufacturer’s specified mounting points on the projector chassis with a
minimum of three mounting legs. Please follow all safety instructions specified by the projector manufacturer
as well as the safety instructions outlined in this manual.
Mounting
Points
Mounting
Leg
Step 1.
Locate the mounting points on the bottom of the
projector.
Step 2.
Attach the appropriate number of mounting legs to the
projector using the corresponding mounting hardware
(see Page 4, Selecting the Proper Mounting Hardware).
Step 3.
Rotate the leveling barrels by hand to adjust the height
of the mounting bracket.
Step 4.
To raise the mounting legs, rotate the leveling barrel
clockwise. To lower the mounting leg, rotate the
leveling barrel counterclockwise.
Installation Manual
Page - 5 -
