144
6. Installation and Connections
Digital RGB signal connection
• Connect a commercially available HDMI cable between the computer’s HDMI output connector and the projector’s
HDMI input connector.
• Connect a commercially available DisplayPort cable between the computer’s DisplayPort output connector and
the projector’s DisplayPort input connector.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
SOURCE button on the projector
cabinet
Button on the remote control
HDMI IN
HDMI
HDMI
DisplayPort
DisplayPort
DisplayPort
NOTE:
• Turn off the power of the computer and projector before connecting.
• Lower the computer’s volume setting before connecting an audio cable to the headphones connector. When using with a computer
connected to the projector, adjust the volume of both the projector and computer to set the appropriate volume level.
• If the computer has a mini-jack type audio output connector, we recommend connecting the audio cable to that connector.
• This projector does not support NEC video unit (model ISS-6020) video decoded outputs.
• When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and
rewinding.
TIP
• The Computer 1 and Computer 2 video input connectors support Windows Plug and Play. The Computer 3 video input connector
does not support Windows Plug and Play.
• A Macintosh signal adapter (commercially available) may be required to connect a Macintosh computer.
To connect a Macintosh computer equipped with a Mini DisplayPort to the projector, use a commercially available Mini DisplayPort
→
DisplayPort converter cable.
HDMI cable (not supplied)
DisplayPort cable (not supplied)
