137
5. Using On-Screen Menu
PROGRAM TIMER
This option turns on/off the projector and changes video signals, and selects ECO mode automatically at a specified
time.
NOTE:
• Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (
→
page
140
)
• Make sure that the projector is in the stand by condition with the POWER cord connected.
• The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the main
power is not supplied to the projector for two weeks or more, the built-in clock stops working.
• When [PROGRAM TIMER] is enabled, the [STANDBY MODE] setting becomes invalid.
This means that the projector is in the same condition when the [NORMAL] is selected for [STANDBY MODE].
Setting a new program timer
1. On the PROGRAM TIMER screen, use the
▲
or
▼
button to select [SETTINGS] and press the ENTER but
-
ton.
The [PROGRAM LIST] screen will be displayed.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required.
ACTIVE ������������������ Place a check mark to enable the program�
