CHAPTER 3
ND-70373 (E)
Page 20
Revision 1.0
SYSTEM STARTUP
1.2 HD Initialization
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
END
START
Set the SENS switch
corresponding to the
Insert the FD “Basic
Software #1” into the FDD.
<7-Segment LED Indication on the EMA card>
<HD Initial End>
HD
Make sure the write-protect
tab is set to “write enable
(permit)” position on the
“Basic Software #1” FD. Note
system to be initialized
(CPU0, CPU1) to “1” on
the EMA card.
Format
Slide the write-protect tab
is set to “write inhibit
(protect)” position on the
“Basic Software #1” FD. Note
Removal or Make Busy of the HFD card is not
allowed while the Floppy Disk or Hard Disk is
being accessed.
WARNING
SENS SW
7SEG LED
FUNCTION
“6”
“3”
“4”
“1”
HD FORMAT
COPY FD
MAKING DIRECTORY IN THE HD
FORMAT
COPY
MAKING DIRECTORY
HD
Flip the MBR key on the CPR
[DOWN
→
UP
→
DOWN].
Note:
Skip this step in the U.S.A, Canada, and Australia.
1
2
3
