113
Appendix
Error Code
Error message
Description
990
LaserBDEepromFail
Data check sum error in EEPROM on LD board.
992
LDMCULockUp
LD uC is locked up.
993
54VError
54V is abnormal.
995
LDEepromFail
Communication error with the EEPROM on LD board.
996
KEY Switch Off
The laser unit laser administrator switch is off.
1000
Slave Comm Fail
Failed to communicate with slave MCU.
1003
Slave Comm Ack Fail
Slave fauls to execut the command.
1004
Slave Power Ready Fail
Slave Power Ready error
1005
Slave No Notify
Slave Power Notify error
1500
P3P3V SAT PGOOD Fail
Error detected with 3.3V power supply for FSB
1501
P2P5V SAT PGOOD Fail
Error detected with 2.5V power supply for FSB
1502
XVT PGOOD Fail
Error detected with DDR power supply for FMT FPGA
1503
P2P5V X PGOOD Fail
Error detected with 2.5V power supply for FMT FPGA
1504
P1P8V X PGOOD Fail
Error detected with 1.8V power supply for FMT FPGA
1505
P1V X PGOOD Fail
Error detected with 1V power supply for FMT FPGA
1506
FMT FPGA DONE Fail
FMT FPGA Configuration Error
1509
EXGPIO IC602 Fail
I2C Device Access Error
1510
EXGPIO IC603 Fail
I2C Device Access Error
1511
EXGPIO IC604 Fail
I2C Device Access Error
1512
EEPROM IC2800 Write Fail
I2C Device Access Error
1513
EEPROM IC601 Read Fail
I2C Device Access Error
1514
EEPROM IC601 Write Fail
I2C Device Access Error
1515
EEPROM IC601 Write Fail(Verify)
I2C Device Access Error
1538
EEPROM IC2800 Read Fail
I2C Device Access Error
1550
EEPROM IC2800 Write Fail Verify
I2C Device Access Error
2000
IntegrityFail
Integrity error with the internal software code of the
projector.
* When this error has occurred, the projector will not
accept any external demands. Communication with
external devices will not be performed either.
2010
Incorrect power-off
PowerOff was not performed correctly last time.
2100
Diffuser2 Wheel Stop
Diffuser2 Wheel has stopped.
2101
Diffuser2 Wheel Stop Precaution
Diffuser2 Wheel Stop Precaution
2110
OverTemp.LS_G1 Precaution
Set inside temperature (LS_G1) is close to over
temperature.
2111
OverTemp.LS_G2 Precaution
Set inside temperature (LS_G2) is close to over
temperature.
2112
OverTemp.LS_G3 Precaution
Set inside temperature (LS_G3) is close to over
temperature.
2113
OverTemp.LS_G4 Precaution
Set inside temperature (LS_G4) is close to over
temperature.
2114
OverTemp.LS_B Precaution
Set inside temperature (LS_B) is close to over
temperature.
2115
OverTemp.LS_R Precaution
Set inside temperature (LS_R) is close to over
temperature.
2120
OverTemp.LS_G1
Set inside temperature (LS_G1) is abnormal.
2121
OverTemp.LS_G2
Set inside temperature (LS_G2) is abnormal.
2122
OverTemp.LS_G3
Set inside temperature (LS_G3) is abnormal.
2123
OverTemp.LS_G4
Set inside temperature (LS_G4) is abnormal.
2124
OverTemp.LS_B
Set inside temperature (LS_B) is abnormal.
2125
OverTemp.LS_R
Set inside temperature (LS_R) is abnormal.
2130
SensorFail LS_G_Module1
Failed to read LS_G_Module1 sensor.
2131
SensorFail LS_G_Module2
Failed to read LS_G_Module2 sensor.
2132
SensorFail LS_G_Module3
Failed to read LS_G_Module3 sensor.
2133
SensorFail LS_G_Module4
Failed to read LS_G_Module4 sensor.
