4
Important Information
9. Turn off the projector, and disconnect the power cable
before moving the projector.
10. The cooling fan settings need to be configured when using
the projector in a location at an altitude of approximately
5500 feet/1600 meters or higher. Refer to “About High Alti-
tude mode” (page 6) for details.
11. Do not install and store the projector in the below circum-
stances.Failure to do so may cause of malfunction.
•
In powerful magnetic fields
•
In corrosive gas environment
•
Outdoors
12. If you wish to have the projector installed on the ceiling;
•
Do not attempt to install the projector yourself.
•
The projector must be installed by qualified technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
•
In addition, to prevent ceiling collapse, the ceiling should
be able to support total weight of 50kg (projector weight
of 44kg, lens weight of 3kg, IMS weight of 3kg) for an
extended period of time, and the installation must be in
accordance with any local building codes.
•
Please consult your dealer for more information.
Refer to “2-2-1. Installing the Projector on the Ceiling”
(page 32) for details on the attachment positions when
installing on the ceiling.
WARNING:
1. Do not cover the lens with the supplied lens cap or equiv-
alent while the projector is on. Doing so can lead to dis-
torting or melting of the cap and burning your hands due
to the heat emitted from the light output.
2. Do not place any objects, which are easily affected by
heat, in front of the projector lens. Doing so could lead to
the object melting from the heat that is emitted from the
light output.
Do not tilt the projector forward or back at a greater angle than
15°. Doing so may result in malfunction. When mounting the
projector on the ceiling, select an appropriate option for [Fan Tilt
Setting].
15°
15°
Power Supply
1. The projector is so designed that it operates with the power
supply voltage described below.
•
AC100–130V 12.2 to 9.0 A 50/60Hz Single-phase
•
AC200–240V 5.8 to 4.8 A 50/60Hz Single-phase
Ensure that your power supply fits this requirement before
attempting to use your projector.
2. The power cable is not included with the projector. Use a
power cable that meets the standards and power supply
voltage of the country where you are using the projector.
Refer to “2-3. Selecting the Power Cable (English)” for
details.
3. Handle the power cable carefully. A damaged or frayed
power cable can cause electric shock or fire.
•
Do not bend or tug the power cable excessively.
•
Do not place the power cable under the projector, or any
heavy object.
•
Do not cover the power cable with other soft materials
such as rugs.
•
Do not heat the power cable.
4. Placing the power cable and the signal cable closely to
each other can cause beat noise. If this happens, keep the
two separated so that beat noise is not generated.
Beat noise is corruption of the picture often seen as a rolling
band moving through the image.
5. Do not touch the projector during a thunder storm. Doing
so can cause electrical shock or fire.
6. When installed on the ceiling, install the breaker in a loca-
tion that is easy to reach by hand.
For UK only:
In UK, a BS approved power cable with
moulded plug has a Black (five Amps) fuse installed for use
with this equipment. If a power cable is not supplied with
this equipment please contact your supplier.
