81
LCD Menu
4-3-6. Memory
This menu is the service personnel menu. For the using service personnel menu, refer to “4-1-1. When You Use the Service Person-
nel Menu” (page 66).
The selected lens memory (lens adjustment value) and the content of the lamp memory (lamp mode and lamp output power value)
can be overwritten with the current settings. Press the LEFT/RIGHT buttons to select the lamp memory or the lens memory then
press the “ENTER” button to display the confirmation screen. Select “Yes” in the confirmation screen, and then press the ENTER
button. The selected memory (lamp memory or lens memory) is overwritten with the current settings.
NOTE
•
Lens memory and lamp memory cannot be newly registered. Use DCC to register the lens memory and lamp
memory in advance. Refer to “Digital Cinema Communicator Installation Manual” for details registering the lens
memory and lamp memory.
•
The lens memory function cannot be used when the lens type is set to “Without Sensor”.
←
Select the lamp memory or lens memory.
←
Select the memory name of the setting to overwrite and press the ENTER button to display
the confirmation screen.
Lamp
Select to change the values of the lamp memory settings.
Lens
Select to change the values of the lens memory settings.
