Built-In AIT Auto-Loader Unit 19
➀
Message area
Displays the Built-In AIT Auto-Loader Unit status. According to the situation, a warning
message or error message (refer to P. 36) appears.
You can change the language of displayed messages to English, French, German, or Spanish
(refer to P. 25).
➁
Cartridge number indicator
Displays the status of the AIT cartridge set in the magazine. While the cartridge is being
replaced, the corresponding cartridge number is blinking. When the cartridge is set from the
magazine to the read/write drive, the corresponding cartridge number goes off. When the
cartridge is returned to the magazine, the cartridge number lights again.
➂
Write-protect indicator
Lights when the AIT cartridge or the magazine is write-protected. To enable the write-protect
function, use the write-protect tab of the AIT cartridge or the magazine.
➃
AIT cartridge types
Displays the type of AIT data cartridge (AIT1 or AIT2) set in the read/write drive.
➄
Data compression indicator
Lights when the Built-In AIT Auto-Loader Unit can use the data compression function or it is
running in the data compression mode.
➅
Tape position indicator
Estimates the residual capacity of the AIT data cartridge set
in the read/write drive.
➆
Cartridge indicator
Lights when the AIT cartridge is set in the read/write drive. Indicates the tape running status.
Blinks while the AIT cartridge is being inserted/ejected into/from the read/write drive.
Much left
Half left
Almost none
Summary of Contents for N8551-29F
Page 46: ......
