Built-In AIT Auto-Loader Unit
9
6
Insert the Built-In AIT Auto-Loader
Unit into the 5.25-inch device bay slot
of the basic processing unit.
When you hear a click sound, the Built-
In AIT Auto-Loader Unit is locked.
<when mounting the Built-In AIT Auto-Loader Unit horizontally>
7
Connect the cable.
Connect two-branched connectors of
the provided power relay cable to the
power connector on the rear of the
Built-In AIT Auto-Loader Unit and the
other side of the power relay cable to
the power cable connector of the basic
processing unit.
Check
✔
This unit does not have a built-in
terminator. When connecting this unit to
the last terminal of the SCSI bus
terminal, attach a terminator to the end of
the SCSI cable.
<when mounting the Built-In AIT Auto-Loader Unit vertically>
SCSI cable
Power cable of the basic
processing unit
Power relay cable
Summary of Contents for N8551-29F
Page 46: ......
