NEC N8403-019, User Manual

Page: 108 / 146

88
1-1 Supported Functions
Read the following sections describing supported functions and precautions before using WebBIOS:
 Indication of model name and capacity of HDD
 Indication of HDD allocation status
 Creation of virtual disk

Setting of RAID level
 Setting of Stripe Block size
 Setting of Read Policy/Write Policy/IO Policy
 Indication of configuration information and status of virtual disk
 Removal of virtual disk
 Clearing of configuration
 Execution of initialization
 Execution of Consistency Check
 Execution of manual rebuild
 Execution of reconstruction
1-2 Notes on Creating Virtual Drive
1.
The HDD
‟s configuring a disk group should have the same capacity and rotation speed.
2.
Be sure to execute Consistency Check after creating a virtual disk.
3.
When installing an OS in a virtual disk under the disk array controller, create a virtual disk dedicated
to the OS installation.
4.
The mouse is disabled on some servers. In this case, use the keyboard TAB key to move the cursor
and the Enter key to select. To select disks or disk groups in the Configuration Wizard, select them by
using the up and down cursor keys while pressing the Shift key.
5.
WebBIOS does not work with the remote console feature of NEC DianaScope.