NEC N8403-019, User Manual

Page: 109 / 146

89
2. Using WebBIOS
2-1 Starting WebBIOS
1.
Press Esc when the screen as shown below appears after powering on the server:
Press<F2> to enter Setup or Press <F12> to network
Press<F2> to enter Setup or Press <F12> to network
2.
During POST, press Ctrl + H when the WebBIOS start message as shown below appears.
WebBIOS starts upon completion of POST.
POST screen image (with no virtual disk assigned)
LSI MegaRAID SAS - MFI BIOS Version XXXX (Build MMM DD, YYYY)
Copyright (c) 2006 LSI Logic Corporation
HA - X (Bus X Dev X) MegaRAID SAS PCI Express(TM)ROMB
FW package: X.X.X - XXXX
0 Logical Drive(s) found on the host adapter.
0 Logical Drive(s) handled by BIOS.
Press <Ctrl> <H> for WebBIOS.
Notice

Do not press unnecessary keys such as Pause during POST.