NEC N8190-157A, User Manual

Page: 47 / 74

1. About This Product
1-1. Specifications
Item Specification Remarks
Fibre Channel interface Short wave laser (LC connector) SFP+ module
Fibre Channel link rate 16Gbps,8Gbps Auto
PCI Express Connector X8
Support
PCI Express 3.0
Physical dimensions 68.9mm(W) x 167.6mm(D) MD2
Weight Under. 0.2kg
Operating voltage PCI Express 3.3V/12V
Power consumption
Typical 9.7W
Max 12.0W
Environmental
condition
Operating
Temperature 0 - 45 degrees C
Humidity 5 - 95 %
No condensation
Storage
Temperature -40- 70 degrees C
Humidity 5 - 95 %
1-2. Features
The N8190-157A Fibre Channel Controller (1ch) is a Fibre Channel host bus adapter card. This
product has a Fibre Channel interface connector.
„
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
„ Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
„ This product is designed to transfer data at high-speed. For the best performance,
it is important to avoid your PCI Express bus becoming a bottleneck that will result
in slow data transfer. You can connect this product in more than PCI Express 2.0
X4 bandwidth slot.
䣐䣱䣶䣫䣥䣧