6
Connect proper cables to the RAID controller and mother board.
Connect the other end of SAS/SATA cable to SAS/SATA2 connector on the Internal RAID
Controller (equivalent to N8103-116A) in PCIe #2 slot, and the other end of SGPIO cable to
SGPIOB connector on mother board.
SAS/SATA1 connector:
Used to connect with the factory-installed 3.5-inch HDD cage (PORT0 to PORT3).
SAS/SATA2 Connector:
Used to connect with the additional 3.5-inch HDD cage (PORT4 to PORT7).
SGPIO1 Connector:
Used to connect with the factory-installed 3.5-inch HDD cage (PORT0 to PORT3).
SGPIO2 Connector:
Used to connect with the additional 3.5-inch HDD cage (PORT4 to PORT7).
Internal RAID Controller
(equivalent to N8103-116A)
SAS/SATA2
connector
SAS/SATA1
connector
SAS/SATA cable
SGPIO cable
SGPIOB connector
SGPIOA
connector
SGPIOB
connector
Mother board
Internal RAID controller
is connected here.
Summary of Contents for N8154-21
