NEC N8154-21, User Manual

Page: 27 / 35

viii
Transfer to Third Party
Make sure to provide this manual and all the accessories along with the product to a third party.
Notice
About data on the hard disk drive
Be sure to take appropriate measures not to leak important data (e.g., customers'
information or companies' management information) on the removed hard disk
drive to any third parties.
Data seems to be erased when you empty "Recycle Bin" of Windows or execute
the "format" command of the operating system. However, the actual data remains
written on the hard disk drive. Data not erased completely may be restored by
special software and used for unexpected purposes.
It is strongly recommended that the software or service (both available at stores)
for data erasure should be used in order to avoid the trouble explained above. For
details on data erasure, ask your service representative.
NEC assumes no liability for data leakage if the product is transferred to third party
without erasing the data.
To transfer or sell any software application that comes with the product to a third party, the following
requirements must be satisfied:
„
All provided software applications must be transferred and no backup copies must be retained.
„
Software applications must be uninstalled before transferring the product.
Data Backup
The device failure due to shock or thermal changes, as well as operator's misconduct, may cause loss of
data. To avoid loss of data, NEC recommends that you should make a back-up copy of your valuable data on
a regular basis.
Transportation
To transport the product, remove the product from the server and put it in the shipping carton along with
accessories according to "Removing or Replacing N8154-21F" described later.
Service Life
The service life of this product is five years.