NEC N8105-53, User Manual

Page: 70 / 72

E-24
6. Restrictions and Precautions
Display Connection Change

You cannot change the display connection while using Mosaic. When you make a change, the screen display may
become abnormal. When this happens, please restore the connection of the display.
 It does not correspond to the change of the display by the hot-swap. Do not do this as it may cause damage.
About Onboard GA Settings Disabled in BIOS
 POST screen is not displayed.
Nothing is displayed on the screen until BIOS initialization is completed on the POST screen and the following
message is displayed.
■Message
Press <F2> to enter setup, <F3> Internal Flash Memory, <F10> Display Boot Menu, <F12> Force Network Boot
The following functions cannot be used on the BMC management console
[Server Information] － [vKVM &vMedia] － [Launch]
[Hardware]
－
[Memory]
[Hardware] － [PCIE]
[Hardware] － [CPU]
[EMS]
－
[Properties]
[Hardware] － [Storage]
[Hardware]
－
[System NIC]
The following message may be displayed.
・
No Signal
・
“Unable to get SMBIOS data. When the BIOS is ready, please try again.”
・
No information display
Warning log is recorded in system event log when Windows Server 2016 starts
When Windows Server 2016 is started, the following Warning may be registered in the system event log of the OS,
but it is a correctable error and there is no problem in operation.
Level
：
Warning
Source ： WHEA-Logger
Event ID ： 17