E-7
■
mDP connector Installation / Removal
When connecting the conversion cable to the N8105-53 mDP, align the latch and lock holes on the
connector. You will hear a click when it is inserted all the way.
Connector latch
MiniDisplayPort Connector
(mDP Connector)
Lock hole
Conversion cable
K410-450(00) etc.
N8105-53
When removing it, hold the connector latch and release the lock, and pull out the connector.
■
DVI-D or DP Installation / Removal
Connect the display cable of the display to be used to the DVI-D or DP connector. The display cable
side is equipped with a fixing mechanism such as a hand screw or latch, so fix it firmly. When
removing, release the fixing before removing.
NOTE:
Insert the connector as far as it will go into a gap and secure it with a connector latch or screw.
Summary of Contents for N8105-53
Page 2: ......
Page 21: ......
Page 36: ...J 16 PhysX 構成の設定 サポート外の機能です PhysX の設定をします ...
Page 61: ...E 15 PhysX configuration settings Unsupported Set up PhysX ...
