Français-30
3) Séquence de commande
[Exemple] Mettre l’alimentation en MARCHE ( ‘ ‘ est pour le code ASCII)
HEX
21h
22h
5Fh 72h 31h
5Fh 72h 32h
5Fh 72h 33h
5Fh 76h 31h
5Fh 76h 32h
Fonctionnement
SOUS TENSION
HORS TENSION
ENTRÉE RVB 1
ENTRÉE RVB 2
ENTRÉE RVB 3
ENTRÉE VIDÉO
ENTRÉE DVD/HD
ASCII
!
"
_r1
_r2
_r3
_v1
_v2
Envoi de commandes
à partir du PC, etc.
30 30 21 0D
'0' '0' '!' ' '
30 30 21 0D
'0' '0' '!' ' '
Code d’état à partir du
moniteur
Signification
Commande pour SOUS TENSION
Commande reçue
(Retour écho de commande)
• La commande HORS TENSION ne doit pas être utilisée moins d’une minute après la mise sous tension.
• La commande SOUS TENSION ne doit pas être utilisée moins d’une minute après la mise hors tension.
Détail de commande
Demandez l’état de l’alimentation
du moniteur.
Le moniteur est sous tension.
Commande à partir de l’ordinateur
30 30 76 50 0D
'0''0''v''P'[enter]
Commande à partir du moniteur
30 30 76 50 31 0D
'0''0''v''1'[enter]
(1) La commande à partir d’un ordinateur personnel au moniteur LCD prendra 400 ms.
(2) Le moniteur LCD enverra une commande de retour 400 ms* après avoir reçu un encode. Si la commande n’est pas
réceptionnée correctement, le moniteur LCD n’enverra pas la commande de retour.
(3) L’ordinateur personnel vérifie la commande et confirme si la commande qui a été envoyée a été exécutée ou non.
(4) Ce moniteur LCD envoie des codes variés autres que le code de retour. Lors de l’envoi d’une séquence de commande via
RS-232C, d’autres codes venant d’ordinateurs personnels seront ignorés.
*: L’heure d’envoi de la commande de retour peut être retardée selon l’activité en cours du moniteur (changement de signal
d’entrée, etc.)
4) Commandes de fonctionnement
Les commandes de fonctionnement exécutent le réglage de fonctionnement de base du moniteur LCD.
Il ne fonctionne pas lors du changement de signal :
5) Commande de lecture
L’ordinateur hôte envoie la commande sans code de données au moniteur.
Après la réception de la commande, le moniteur renvoie la commande avec le code de données de l’état en cours à l’ordinateur hôte.
<ex> Quand l’ordinateur hôte vérifie l’état de l’alimentation du moniteur, l’état du moniteur est sous tension.
Utiliser un LCD avec un ordinateur personnel (PC)
–suite
AV
AV
Indique une fonction de l’appareil AV.
Toutes les fonctions AV sont activées quand l’appareil AV
est installé.
AV