12
2
Slide the slider stoppers outward and lock the cover.
3
If the computer is placed horizontally, proceed to step 6.
When you stand the computer vertically, place at the edge of the desk to keep it
stable.
4
Align the stabilizers with the prongs on the computer and slide the
stabilizers in the direction of the arrow until the stopper locks.
5
Stand the computer vertically.
6
Attach the security lock, if necessary.
7
Connect the power cord and all other cables and cords.
Memory
Before installing memory in this computer, check the memory compatibility, the
installation order and the location of the slot.
This machine has four memory slots and allows a maximum of 8 GB.
Up to four memory cards can be installed one at a time (two memory cards are
installed at the time of shipment from the factory).
Insert the memory in the order of DIMM_A2, DIMM_B2, DIMM_A1 and DIMM_B1.
Slot location
Please be careful not to pinch, strike, or cut your fingers when attaching stabilizers.
Slide stopper
Stopper
Prong
Before installing the board
Inserting the memory into the slot
To use dual-channel memory access with two pairs of memory cards, install the two
pairs of the same capacity in DIMM_A2 and DIMM_B2 or DIMM_A1 and DIMM_B1.
8
DIMM_A2
DIMM_A1
DIMM_B1
DIMM_B2
NEC_Mate.fm Page 12 Monday, November 12, 2012 3:39 PM
