English-28
FIRST DETECT
When the current video input signal is not present, then the monitor searches for a video
INPUT DVI, VGA, RGB/HV only
signal from the other video input port. If the video signal is present in the other port, then the
monitor switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
LAST DETECT
When the monitor is displaying a signal from the current source and a new secondary source
INPUT DVI, VGA, RGB/HV only
is supplied to the monitor, the monitor will automatically switch to the new video source.
When current video input signal is not present, the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
VIDEO DETECT*
DVD/HD or VIDEO inputs will have priority over DVI, VGA, RGB/HV. When DVD/HD or
VIDEO input signal is present the monitor will change and keep to the DVD/DH or VIDEO
input.
LONG CABLE ON/OFF
Compensates for image degradation caused from using a long cable.
INPUT VGA, RGB/HV only
LONG CABLE MANUAL
Manually compensates for image degradation caused from using a long cable.
INPUT VGA, RGB/HV only
RED DELAY
Adjusts the phase of the red signal.
GREEN DELAY
Adjusts the phase of the green signal.
BLUE DELAY
Adjusts the phase of the blue signal.
RED SHARPNESS
Adjusts the performance degradation of the RED signal.
GREEN SHARPNESS
Adjusts the performance degradation of the GREEN signal.
BLUE SHARPNESS
Adjusts the performance degradation of the BLUE signal.
SOG PEAK.
Adjusts the shape of Sync on Green signal.
VIDEO EQ.
Optimize the shape (Tailing) of RED, GREEN and BLUE signals.
SYNC TERMINATE
Selects the terminate resistance for matching the cable impedance.
DVI MODE
Selects the kind of DVI-D equipment which is connected DVI.
Select “DVI-PC” when PC or other computer equipment is connected.
Select “DVI-HD” when DVD player, which has DVI-D output, is connected.
SCAN CONVERSION
Selects the IP (Interlace to Progressive) conversion function.
PROGRESSIVE
Converts interlaced signals to progressive. This is the default setting.
INTERLACE
Disables IP conversion. This setting is best suited for motion pictures, but increases the risk
of image retention.
SCART MODE*
Input mode for devices using SCART connectors.
S-VIDEO MODE*
Selects the S-Video input port function.
PRIORITY
When an S-Video cable is connected to the S-Video input, it will have priority over the
composite input port.
SEPARATE
The S-Video port and Composite port can be selected as independent input ports.
COLOR SYSTEM
The selected Color System depends on the video format of the input signal.
INPUT VIDEO, TV only
AUTO
Automatically chooses Color System setting based on input signal.
NTSC
PAL
SECAM
4.43NTSC
PAL-60
SCAN MODE*
Some video formats may require scan conversion in order to best display the image.
INPUT HDMI, DVD/HD, VIDEO, TV only
OVER SCAN
Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
UNDER SCAN
Image size stays within the display area. The whole image is displayed on the screen.
*: The product you purchased may not have this feature.
01_English
18/12/06, 8:52 AM
28
