English-27
English
OSM RESET
Resets the following settings within the OSM menu back to factory setting:
OSM TURN OFF, OSM POSITION, INFORMATION OSM, OSM TRANSPARENCY.
MULTI DISPLAY
MONITOR ID
Sets the monitor ID number from 1-26.
IR CONTROL
Selects the mode of the monitor for use with the infra-red remote control when using the
RS-232C daisy chain.
NORMAL
The monitor will be controlled normally by wireless remote controller.
PRIMARY
Choose “PRIMARY” for the first monitor within an RS232-C daisy chain.
SECONDARY
Choose “SECONDARY” for all subsequent monitors within an RS232-C daisy chain.
LOCK
Prevents the monitor from being controlled by wireless remote controller. To return to normal
operation, press the “DISPLAY” button on the remote controller for 5 seconds.
TILE MATRIX
Allows one image to be expanded and displayed over multiple screens (up to 25) through a
distribution amplifier.
H MONITORS
Number of monitors arranged horizontally.
V MONITORS
Number of monitors arranged vertically.
POSITION
Select which section of the tiled image to be displayed on the monitor.
TILE COMP
Turns the TILE COMP feature on.
ENABLE
Enables Tile Matrix.
POWER ON DELAY
Adjusts the delay time between being in “standby” mode and entering “power on” mode.
“POWER ON DELAY” can be set between 0 and 50 seconds.
MULTI DISPLAY RESET
Resets the following settings within the MULTI DISPLAY menu back to factory setting:
MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.
DISPLAY
POWER SAVE
Sets how long the monitor waits to go into power save mode after a lost signal.
PROTECTION
STANDBY MODE
Lowers power consumption.
Note: RS232-C Function is lost when in Eco Standby mode.
HEAT STATUS
Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE.
FAN CONTROL
Cooling fan reduces the temperature of the display.
SCREEN SAVER
Use the SCREEN SAVER function to reduce the risk of Image Persistence.
GAMMA
The display gamma is changed and fixed when “ON” is selected.
BRIGHTNESS
The brightness is decreased when “ON” is selected.
MOTION
The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT)
at user determined intervals.
SIDE BORDER COLOR
Adjusts the color of the side borders when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
AUTO BRIGHTNESS
Adjusts the brightness level according to the input signal.
INPUT DVI, VGA, RGB/HV only
CHANGE SECURITY
Allows the security password to be changed.
PASSWORD
The factory preset password is 0000.
SECURITY LOCK
Locks the security password.
DISPLAY PROTECTION
Resets the following settings within the Picture menu back to factory setting:
RESET
POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER
COLOR, AUTO BRIGHTNESS.
ADVANCED
INPUT DETECT
Selects the method of input detection the monitor uses when more than two input devices
OPTION
except TV input
are connected.
NONE
The Monitor will not search the other video input ports.
*: The product you purchased may not have this feature.
01_English
18/12/06, 8:52 AM
27
