37
6
7
Clockwise
Counterclockwise
Anamorphic lens facing up
Anamorphic lens facing down
Adjust until vertical distortions are removed.
Pan angle adjusting/fixing scres
Tighten the right screw.
Tighten the left screw.
Adjust until horizontal distortions are removed.
햸
Loosen the two pan angle adjusting/fixing screws
(hex screws) and shift the anamorphic lens hori-
zontally so that the projected image becomes as
illustrated below. Securely tighten the screws af-
ter completing the adjustment of pan angle.
Note:
Be careful not to allow the anamorphic lens to get into con-
tact with the primary lens when the former is panned. If the
two lenses eventually meet, repeat step (2) above